收藏本站
(2/24)
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
001-01 / 20130929 / inductor_high-frequency_mlg_en.fm
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
MLK1005S39NJ INDUCTOR MULTILAYER 39NH 0402
MLP2012S2R2M INDUCTOR MULTILAYER 2.2UH 0805
MLP561M300EB0A CAP ALUM 560UF 300V 20% RADIAL
MLS 561M250EB0C CAP ALUM 56UF 250V 20% RADIAL
MLZ2012M1R0H INDUCTOR MULTILAYER 1UH 0805
MM01075 63/37 HYDRO-X 2% .024DIA/23SWG
MMK15154K400B04L4BULK CAP FILM 0.15UF 400VDC RADIAL
MMP4W2P2K-F CAP FILM 2.2UF 400VDC AXIAL
相关代理商/技术参数
MLG1005S6N2JT 制造商:TDK 制造商全称:TDK Electronics 功能描述:SMD Inductors(Coils) For High Frequency(Multilayer)
MLG1005S6N2S 功能描述:固定电感器 6.2nH 100MHz 5.1ohms 250mA RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
MLG1005S6N2ST 功能描述:固定电感器 0402 6.2nH 0.3nH RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
MLG1005S6N2ST000 功能描述:6.2nH Unshielded Multilayer Inductor 600mA 250 mOhm Max 0402 (1005 Metric) 制造商:tdk corporation 系列:MLG 包装:剪切带（CT） 零件状态:有效 类型:多层 材料 - 磁芯:无磁性 电感:6.2nH 容差:±0.3nH 额定电流:600mA 电流 - 饱和值:- 屏蔽:无屏蔽 DC 电阻（DCR）:250 毫欧最大 不同频率时的 Q 值:8 @ 100MHz 频率 - 自谐振:4GHz 等级:- 工作温度:-55°C ~ 125°C 频率 - 测试:100MHz 安装类型:表面贴装 封装/外壳:0402（1005 公制） 大小/尺寸:0.039" 长 x 0.020" 宽（1.00mm x 0.50mm） 高度 - 安装（最大值）:0.022"（0.55mm） 标准包装:1
MLG1005S6N2STD25 功能描述:6.2nH Unshielded Multilayer Inductor 600mA 250 mOhm Max 0402 (1005 Metric) 制造商:tdk corporation 系列:MLG 包装:剪切带（CT） 零件状态:有效 类型:多层 材料 - 磁芯:无磁性 电感:6.2nH 容差:±0.3nH 额定电流:600mA 电流 - 饱和值:- 屏蔽:无屏蔽 DC 电阻（DCR）:250 毫欧最大 不同频率时的 Q 值:8 @ 100MHz 频率 - 自谐振:4GHz 等级:AEC-Q200 工作温度:-55°C ~ 125°C 频率 - 测试:100MHz 安装类型:表面贴装 封装/外壳:0402（1005 公制） 大小/尺寸:0.039" 长 x 0.020" 宽（1.00mm x 0.50mm） 高度 - 安装（最大值）:0.022"（0.55mm） 标准包装:1
MLG1005S6N2T 制造商:TDK 制造商全称:TDK Electronics 功能描述:Inductors for High Frequency Multilayer Ceramic
MLG1005S6N8BT 制造商:TDK 制造商全称:TDK Electronics 功能描述:SMD Inductors(Coils) For High Frequency(Multilayer)
MLG1005S6N8CT 制造商:TDK 制造商全称:TDK Electronics 功能描述:SMD Inductors(Coils) For High Frequency(Multilayer)